Contextual Learning

Learning resources that can be used as a reference for the tasks college education majoring in English.

What is small group teaching?

Small group teaching is defined by group size, usually 6 to 10 participants, and a focus on active learning and communication between members of the group.22 These sessions can occur in a conference room, an administrative or clinical office, or even at the bedside of a patient. You will need to assure that the room is large enough for everyone to be able to sit and make eye contact. Tutorials, seminars, and attending rounds are the traditional modes of small group instruction in the clerkships. Small groups can be effective in accomplishing many tasks:
ƒ   Introduction of new material/concepts (basic science and/or clinical)
ƒ   Review of material
ƒ   Application of material
ƒ   Journal club discussion of article(s)
ƒ   Case-based formats for review, introduction, integration, or application of material


ƒ   Patient-centered discussions (e.g., bedside teaching; ambulatory teaching)
ƒ   Team projects

As Steinert has written, “small group teaching offers students an opportunity to discuss and refine their understanding of complex issues, to problem solve and apply their knowledge to new situations, and to reflect on their attitudes and feelings.23 This method also provides an opportunity for integration of domains such as professionalism, humanism, communication skills, and self-directed learning into the formal curriculum of the clinical years. Finally, small group teaching allows for much closer contact with faculty than the traditional lecture approach.

Categories of small group teaching

The main categories of small group teaching methods that will be presented in this section are focused discussion, problem-based learning, student-led seminars, and role-play.22

Focused Discussions

In focused discussions, a faculty member will present a case or a problem and then lead a discussion with the rest of the group. Cases should be relevant to the learners, address defined learning objectives, and contain teaching points that can be applied to other situations.24 Cases can be prepared in advance by the faculty member to “capture real life situations in which a professional (representing the students who are training to adopt similar professions) confronts a dilemma common to the discipline.” 25 Cases can also be prepared by students, based on a memorable or relevant clerkship experience. The discussion is usually led by the faculty member, but can be assigned to the student. One can also consider using video clips, handouts, or study guides to stimulate discussion, reflection, and learning in the small group setting.23

Strengths and Weaknesses:
The strengths of focused discussions are that they are case-based, relate to potential clinical experiences, and encourage the learner to actively apply knowledge. Additionally, the team approach to solving the case helps develop communications skill for use on the ward and other clinical settings. The limitations of focused discussions are that prepared cases may not be directly relevant to the learners’ own experiences on the clerkship.

Problem-Based Learning (PBL)

This technique is similar to the focused, case-based discussions, but encourages increased learner independence. PBL traditionally has been used for teaching in the first 2 years of medical school, but can also be an effective teaching strategy in the clerkship years. As part of a small group (ideally 4-6 members), students are first presented with a clinical problem that unfolds over 2 to 3 sessions with progressive disclosure of historical information, physical exam, laboratory data, etc. Students define the facts, develop hypotheses based on these facts, and then develop their own learning objectives and plan for solving the clinical problem. At the beginning of each session, students self assign their roles in the session, as Leader (moderator), Reader, Scribe, or Participant. These roles will rotate with subsequent sessions, ensuring maximum active participation from all members in the group. Learning objectives are researched between sessions by students and presented back to the group for discussion. This type of small group fosters self-directed learning and teamwork among participants. The faculty members role in PBL is to facilitate this process, rather than to direct and lead it. For more information about problem-based learning, the brief overview by Wood should help.26

Strengths and Weaknesses:
Because PBL is cased-based, students are more focused on the clinical usefulness of the information they look up and report to the group. Students also learn to work more independently, and there is a greater focus on self-directed learning. Teamwork is encouraged. PBL takes more in-class time than other methods. Faculty have less control over the learning environment than in focused discussions because they function as facilitators of the process and not discussion leaders.

Student-led Seminars

In these seminars, the student is charged with presenting a topic to the rest of the group. The nature of the topics is usually negotiated within the small group. A topic may be chosen to complement a previous discussion or clinical experience, or a new topic may be presented. The presentation is usually followed by a focused discussion. Expectations for length of presentation, use of handouts, or audio-visual material should be clearly stated in advance.

Strengths and Weaknesses:
A major benefit of student-led seminars is that the topic discussed is relevant to the learning needs of the small group and is taught at the level of the learners. This strategy also provides an opportunity for students to teach each other. One weakness of this teaching method is that student–led seminars rely on the student teacher’s knowledge
of the topic and application of effective teaching methodology. Thus, discussions may not be well presented or facilitated, and there is a danger that the clinical relevance and applicability will not be clear.

Role-Play

Role-play is an excellent technique for building clinical skills in the safety of the small group setting. It is particularly effective for practicing communication skills. Role-plays can be based on previously scripted written scenarios or on a real case that may have been presented to the group. Clear instructions must to be given regarding the nature of the roles, timing, and specific objectives. The role-play may be enacted in groups of
two, with one student playing the “physician” and another playing the “patient.” Role- play can also take place in groups of three, with an observer added to the group. The observer should be given a checklist to facilitate observation and feedback. The role- play should always be followed by a debriefing and an opportunity for self-assessment


and feedback. The student in the role-play, the physician, should first be given the opportunity to self-assess by being asked “what went well” and “what would you have liked to have done differently?” Opportunities for a “re-play” may be given if desired. Ideally, students should switch roles so that each one has the opportunity to practice each role. An alternative is to have a role-play demonstration, also known as a fish bowl, with the rest of the group observing and participating in the feedback session.

Strengths and Weaknesses:
The role-play method allows learners to practice clinical skills, particularly communication skills, in a safe environment without the expense of paying for a Standardized Patient. The faculty member can directly observe the skills of multiple students during a single session. By playing the role of the patient, the student can get a better understanding of the patient’s point of view. The biggest limitation of role-play is the almost universal hesitance of students (and sometimes faculty) to role-play.



Brief Description
Student
Preparation
Faculty
Participation



Focused
Discussions



Faculty-moderated discussion of a case


Students should read on topic area in advance
Faculty member guides the discussion based on defined learning objectives



Problem Based
Learning

Student-driven, problem-centered case discussions
that unfold over two- three sessions
Students identify learning issues during the case session which they research between meetings
Faculty member facilitates the student’s discussion of the cases and student-identified learning issues



Student-led
Seminars


Topic-centered discussions led by students
One student (the “teacher”) prepares a presentation on a topic relevant to a case

Faculty member should be prepared to assist the “student teacher”




Role-play

Students are assigned roles based on written scenario to simulate real interaction in a classroom setting



Preparation generally unnecessary

Faculty member demonstrates technique and serves as observer to assess skills and to provide feedback

Categories of Small Group Teaching


Using Small Groups Effectively

For small group instruction to be effective, the instructor should keep in mind five principles of adult learning theory.27 Adults learn best when:
•     Instruction is relevant
•     Instruction is conducted in a safe learning environment that encourages a processing and verbalization of thought
•     Instruction draws from the learner’s experiences
•     Instruction is problem-centered
•     The adult learner is provided with feedback

Encouraging Participation

One of the biggest concerns of any small group facilitator is getting all the group members to participate. Jaques describes a number of techniques for breaking down a group of learners into smaller units, thereby increasing student participation and decreasing the involvement of the faculty member: 28
 
•     “Group Round” - Participants are given a brief period of time to say something and then move to the next member of the group (for example, an icebreaker in which students are asked to state their name and its meaning).

•     “Buzz Groups” - Students pair up with a neighbor to discuss their own answers to a particular question for a set period of time. Then the larger group reconvenes and discusses the answers.

•     “Snowball or Pyramid Groups” - Participants are initially asked to carry on a discussion with their neighbor (buzz group) and then sequentially neighboring groups are paired to form groups of four, then eight. A representative from this group then presents the group’s findings back to the larger classroom group.

•     “Fishbowl Groups” - The group is divided in two, where there is an inner, discussion or role-play group, and an outer observational group. After a period of observation and a debrief session, the roles may be switched.

•     “Crossover Groups” - Students are divided into subgroups for the initial discussion. The subgroups are then divided and participants are split into new subgroups to maximize the amount of information crossover.

•     “Circular Questioning” - Each member of the group asks a question to another group member, who briefly answers the question. Then the next person in the circle asks a question. The exercise is complete when everyone has asked a question. The facilitator can wrap up the session by summarizing questions asked and responses.

•     “Horseshoe Groups” - Small groups are arranged around tables and each table is arranged in horseshoe fashion around the lecturer. This allows the facilitator to move between lecturing and interactive small group activity.



Pengikut